Description
- Â VM dual magnet cartridge with 3.0 mil conical stylus
- Â Aluminium cantilever
- Â Specially wound coils increase output voltage
- Â Durable low-resonance polymer housing
-  Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
- Â Compatible with any AT-VMN95 replacement stylus
-  Universal ½”-mount headshell for 4-pin turntable cartridges
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required.” – Audio-Technica
The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell.
SPECIFICATIONS:
Frequency Response | 20-20,000 Hz |
Channel Separation | NA |
Vertical Tracking Force | 4.5-5.5g (5.0g standard) |
Stylus Construction | Bonded round shank |
Recommended Load Impedance | 47,000 ohms |
Output | 2.7 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 1.5 dB (1 kHz) |
Stylus Shape | 3.0 mil conical |
Cantilever | Aluminium pipe |
Mount | Half-inch |
Replacement Stylus | AT-VMN95SP |
Coil Impedance | 3.3 k ohms (1 kHz) |
DC Resistance | 485 ohms |
Load Capacitance | 100 to 200 pF |
Coil Inductance | 550 mH (1 kHz) |
Vertical Tracking Angle | 23° |
Dimensions (Cartridge) | 17.2mm H × 18.9mm W × 28.3mm D |
Weight (Cartridge) | 6.1g |
Dimensions (Cartridge & Headshell) | 21.2mm H × 21.4mm W × 62.4mm D |
Weight (Cartridge & Headshell) | 15.5g |
Accessories Included | Two 11mm installation screws, two 8mm installation screws, two washers |